Industry Information

Update September 28, 2023

Rolling technology for CNC turning machine thread turning is generally carried out in thread rolling machines, thread rolling machines or on automatic lathes with automatic opening and closing thread...

Update September 07, 2023

Aluminum alloy heat treatment technology

1. Aluminum alloy heat treatment principle Aluminum alloy casting heat treatment is to use a heat treatment specification, control the heating rate to a certain temperature and heat for a certain...

Update August 28, 2023

Radiator extrusion technology

Aluminum alloys are widely used for radiator materials because of their light weight and beautiful appearance, good thermal conductivity, and ease of processing into complex shapes. There are three...

Update August 01, 2023

Post-weld heat treatment of aluminum and aluminum alloy

First, remove the residue After the welding of the weldment, if the welding or welding of the welding rod is used, the weld and the residual flux and welding slag on both sides should be removed in...

Update July 21, 2023

Aluminum profile heat sink installation steps

The aluminum profile radiator is also called the radiator aluminum profile or the sunflower profile aluminum profile. The aluminum profile radiator has the characteristics of beautiful appearance,...

Update July 06, 2023

China-CNC-Machining-Machining-Parts-Machining-Product-CNC-Parts

Precision Machining Part's Advantage: 1) The CNC machining part's material can be customized, such as steel, brass, etc 2) Tolerance: +/-0.01mm or much better 3) High precision machining parts or CNC...

Update June 21, 2023

Lathe CNC machining basics

1 Rapid and high precision knife setting method for outer diameter end face cutter of CNC lathe The traditional lathe is mainly used to test the workpiece by cutting the workpiece, that is, turning...

Update June 09, 2023

Extrusion process

In order to ensure the wire take-up at different line speeds, the constant tension requirement from the empty plate to the full plate operation, it is desirable to have the wire tension adjusting...

Update May 29, 2023

Hot stamping technology - hot stamping equipment

Hot stamping equipment from hot stamping technology In the fierce competition in the market, in order to highlight the exquisite product packaging, increase the added value of products and more...

Update May 09, 2023

Machining of part chamfers

A variety of different effects can be used to modify the edge of the part. The method described here makes it easier to trim the edges of the part. A variety of different effects can be used to...